Candles are home’s decorative pieces. Various candle molds have come up to supplement to hungry market for consumers. You can use candles as a way of restoring fragrance and light in the room.
A candle is typically that container that has a wick at the center. As you pour a hot wax, it cools down as it maintains its shape. As you remove it from the mold, it will stand independently.
The molds will manifest in multiple shapes and sizes. Notably, they come from various materials. Let’s get a little deeper.
Contents
Types of Candle Molds
Most of the molds result from various materials. The variety of the materials used in its construction will automatically give it a related name. Such molds are as listed below:
a) Aluminum Mold
Aluminum mold is the widely used candle mold in society. It has several qualities that make makes it an excellent choice for many people. One of the unique conditions of the aluminum mold is the heat-resistance property.
Also, the aluminum mold is usually clean and has a long shelf-life. It is relatively affordable as compared to other molds like rubber. Notably, the aluminum mold will not let seam to appear on candles. One will not perform a lot of trimming as a finishing touch.
One of is downsides is that it comes in limited shapes. Also, it requires the releasing agents to remove the candle from the mold. The entire process may be time-consuming.
b) Plastic Mold
Plastic mold will favor beginners. You can cheaply acquire them. Furthermore, they are safe while handling them. As if that is not enough, the mold comes out as the clean. One will only require clean water and an ordinary soap to perform any cleaning.
The candle Molds that come from plastic materials have a shorter shelf-life.
c) Metal Mold
The metal mold is in high demand due to its longevity. Also, the user will require minimal maintenance. The good news is that the metal mold is available in various shapes and sizes.
One will not have to invest in trimming since these metals mold does not have seams. In other words, they have good finishing. You can use them for a longer duration if you only handle them with care.
d) Rubber Mold
Rubber molds come in various categories. Some of them are:
· Polyurethane Mold
It is a popular rubber mold that is cheaper. It is also a popular choice among mold makers. The downside of this product is that it transfers a bad odor to the finished candle. Also, one must use a releasing agent to remove it from the mold so that it can maintain a smoother finish.
· Silicone Mold
It also happens to be another type of rubber mold. It is a popular choice since the candle comes in multiple sizes and shapes. Also, one can easily remove it from the mold because it possesses a non-stick surface.
The mold features a flexible surface. As a result, one will not have to use a releasing agent to remove it from the mold. It will also maintain a smooth finish where the end-user will not have to trim again.
One of the downsides is the scent retention. It also has a mild-instability with a damage-prone surface. Moreover, such types of candle molds are slightly expensive.
· Latex Mold
It is another type of rubber mold which one can use to make intricate designs and complex shapes like fruit flowers and animals. The cool thing about this latex design is that they are highly flexible. One can create intricate patterns and seamless designs.
The rubber mold will come with a self-sealing wick hole. Also, one will not use a releasing agent when removing it from the mold. If the wick hole is not present, you can make one using a needle.
This candle mold is a popular choice due to its versatility.
e) Glass Mold
Glass molds are popular products that will cool fast to quicken the entire process; thus, they are time-saving. Another exciting feature is that these candle molds will not require a releasing agent while removing them for that particular mold.
Most of the candles that result from this process have a seamless and smooth finish. Still, another advantage with glass is that the material is readily available.
The downside with glass molds is that they are highly delicate. They can break if you fail to take care of them properly. They are also prone to cracking and scratching.
Another notable aspect that a glass mold has is that it will not tolerate extreme heat. Suppose the temperature exceed a particular limit, it may eventually explode.
How to Make a Candle Mold at home
The following is a procedure of making a candle old. Precisely, it will be a silicone candle mold.
Requirements
- Silicone rubber mold
- Plywood
- Dry brush
- Plasticine clay
- Mixing containers
- Candle wax
- Wick for the candle
- Poly paddle
- Paraffin bath
- Scapel
- Drill
- Screws
Procedure
- You will begin by selecting a model that you want to replicate. The final product will mimic the same shape. Some people use 3D printersto produce particular designs.
- Proceed by constructing the mold box. Also, select a suitable container that you will place in the container. The mold box should be spacious to accommodate your mold. In our case, we will use the plywood to construct the mold box.
- Add a stick adhesive and wait for it to act for at least 5 minutes. As the epoxy is curing, you can continue to construct the mold box walls.
- Apply the release agents and sealer as necessary and complete the preparation of the mold.
- Measure and pour the silicone rubber as you mix them well. You can leave the solution for at least 5 hours while at room temperature.
- Demold as you cut the mold if necessary.
- You can now pour your wax into the Pillar candle mold. You can also feed the wick through a hole that you created earlier as you let the wax cool.
- Start to remove the candle from the mold. You should also trim the wick as you find it appropriate.
Application of Candle Molds in our Daily Lives
· Meditation and Prayer
Many like to light their candles a practice during their meditation and prayer. They will visualize the flame as they sent their intentions to a higher power. They act as an inspiration for enhancing one’s prayer life.
· Romance
Some use the candle to keep that spark of their romance lively. The candle decorates the room with romantic flames that improves their attitude towards one another. A better practice is to place the candle mold on the nightstand and let the flame speak volumes about your desires.
· Self-Expression
Some candles come with particular scents. One can burn a candle that features one specific scent, especially the ones you love. It is all about your specific taste for a smell. You can use the smell to express your pleasure about a particular aspect.
· Travel
You can carry taper candle molds along while traveling. It should be part of your travel gear. Such an arrangement makes one feel the home environment whenever you will be.
· Health
The candles will provide a perfect atmosphere where you will appreciate a calm and healthy mind. Suppose fears grip you; you can light up your candle as a way of restoring hope and confidence. It is also vital to note that some candles are a health hazard to your body, especially the harmful paraffin wax.
· Décor
You can use candles to provide a stylish finish to your room. Since the candle molds are versatile, they will feature in several styles and shapes. You can strategically arrange the candles in the living room to make particular designs.
· Fragrance
Manufacturers make candles in various scents. Some are masculine or feminine scents. You can light them in your room to enhance the atmosphere. You can improve the atmosphere and the related smell in the place.
· Romance and Celebration
Some couples light candles in the celebration of their anniversary. Some other occasions where you can use silicone candle molds are during the celebration of weddings, birthdays, and graduation ceremonies.
· Ambiance and Atmosphere
As you light the candle, it is likely to produce an unmatched ambiance. As you light several candles in the room, it restores a welcoming atmosphere and improves the overall look. You can use beeswax candle molds for soothing and also healing the broken hearts and moods.
In conclusion
Candle molds are popular items that modern society is using as a lifestyle. It is noteworthy that many ancient communities used it. We can improvise their technology to make better products.
Candle molds can come from various materials. You can find suitable materials and create one for yourself.
The best material has been metal, among others. It has a long shelf life, and all the molds that come out are smooth.
Other materials used to make candle mold are also useful. You must be care careful about their quality. Some of them may not withstand heat and are prone to cracking and breaking.
For more information about candle molds making services, reach us on.
Related source links:
Handbook: The Ultimate Guide To Chocolate Candy Molds
Handbook: Everything You Should Know About Dice Molds
Handbook: The Ultimate Guide to Silicone Molds
Handbook: The Ultimate Guide to Resin Molds
Rocheindustry specializes in high quality rapid prototyping, rapid low-volume manufacturing and high-volume production. The services of rapid prototype we providing are professional Engineering, CNC Machining including CNC Milling and Turning, Sheet Metal Fabrication or Sheet Metal Prototyping, Die casting, metal stamping, Vacuum Casting, 3D printing, SLA, Plastic and Aluminum Extrusion Prototyping, Rapid Tooling, Rapid Injection Moulding, Surface Treatment finish services and other rapid prototyping China services please contact us now.